Electric Winch 12V, IP68 Waterproof Synthetic Rope 1/4 Diameter X 50' Length

  

Electric Winch 12V, IP68 Waterproof Synthetic Rope: 1/4 Diameter X 50' Length, for ATV UTV Truck SUV, 1.5 HP Motor, 201:1 Gear Ratio. 20.5 x 12.5 x 6.75 inches. 12.5 inches x 20.5 inches x 6.75 inches. Standard duty winch with a synthetic rope and an 5,500 lb. Capacity, provides car and off-road recovery in tough situations for trucks, SUVs, ATVs, and UTVs.

Powerful 12V DC 1.5 HP Permanent Magnet motor and 3-planetary gear train deliver faster line speed under load, with lower amp draw, Gear Reduction Ratio: 201:1. Come with ergonomic wired remote control, allows for retracting the rope for winching as desired, for safe operation at a distance.

The winch contains a Aluninum Hawse Fairlead and an aircraft-grade synthetic rope. Rope Size: 0.25 x 50.

Features IP68-rated waterproof construction and corrosion-resistant design ensures winch is built to last. Mounting Hardware: Adaptor Plate: 4xM8x25mm; Fairlead: 2x M8x25mm; Relay: 2x M5x20 mm. Dimensions: 15.3 X 4.7 X 4.6 inches. POLESTAR 5,500lb 12V-DC Electric ATV/UTV Winch. The Polestar 5,500lb 12V DC Electric ATV/UTV Winch features a 1.5 HP permanent magnet motor that stays cooler during long pulls.

The three-stage planetary gear system provides fast line speed. The automatic load-holding brake ensures maximum safety. The free spooling provides a fast line-out, while the 12' ergonomic handheld remote control allows for safe operation at a distance. To prevent injury or property damage, read and understand all instructions before operating winch. Wear ANSI Z87.1 compliant safety goggles and heavy-duty leather work gloves during operation. Do not exceed the rated load capacity. Be aware of dynamic loading!

Sudden load movement may briefly create excess load causing product failure. 12V DC 1.5 HP Permanent Magnet Motor. Large-diameter motor provides maximum torque for more pulling power. Auto brake system holds full rated load, provides superior load control.

Heavy-duty stage planetary steel gears deliver faster line speed under load, with lower amp draw. Features IP68-rated waterproof construction to keep components out, and one-piece cast aluminum backing plate for extra strength and durability.

The mounting plate must be rated to at least the winch'scapacity. It must be flat and strong enough to remain flat at maximum winch capacity. The winch must sit flat on the winch mount, with no gaps under drum supports.

Align the winch perpendicular to centerline of the vehicle at the desired location and mark the locations of the winch base holes. Compare the dimensions of the marked holes. Before drilling, verify that the installation surface has no hidden components or structural pieces that will be damaged. This winch can generate extreme forces.

Select a location that can withstand the rated capacity without damage or weakening. Steel reinforcement plates may be needed or a certified welder may need to weld on additional bracing, depending on the mounting location. Drill holes for the hardware at the marked locations. Install the winch using hardware described under the specifications table.

12V DC 1.5 HP Permanent Magnet. Wired, 12ft (3.7m) long. Power in & Power Out.

5/16 Clevis, with Spring-Loaded Safety Latch. 0.25 x 50' (6.5mm x 15.2m), Synthetic Rope. 12V DC Minimum 20 Ah.

Overall Dimensions (L X D X H). 15.3" X 4.7" X 4.6 (387mm x 120mm x 118mm). IP 68 - Winch and Controls. 3''x 6.6'' (76mmx167mm). Adaptor Plate: 4xM8x25mm; Fairlead: 2xM8x25mm; Relay: 2xM5x20mm. We guarantee against any defective or misrepresented products.