10000 Lb. Load Capacity Electric Winch Kit 12V Synthetic Rope, Waterproof Electri

  
Load Capacity Electric Winch Kit 12V Synthetic Rope, Waterproof Electric Winch with Hawse Fairlead, with Wireless Handheld Remote and Corded Control Recovery. 20.8 x 4.7 x 9.8 inches. 4.7 inches x 20.8 inches x 9.8 inches. Equipped with the latest generation wireless remote control for all the latest X BULL winches. Winch powered by a 4.5kw/5.6hp output permanent magnet DC 12V motor. The new solenoid truly achieves the principle of heat insulation, durability, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The new clutch system strengthens the connection between the clutch and the gear, it is not easy to cause damage to the clutch. Installation dimensions: (length X width X height) 20.8"X 6.5" X 10.24", mounting bolt type: 10.00 ± 0.015" × 4.50 ± 0.010. Synthetic rope: 3/8''x 78 feet.

Winch Load Capacity: 10,000 Pounds;5.6 Horsepower; Gear Ratio: 265:1; With a 3-stage planetary gear system for strong pulling; The unique design is very suitable for your jeep Wrangler, SUVs, trucks and trailers, making it more attractive and cool. To install the winch and fairlead, getting a mounting bracket set up which not includes in this product; Please read the instructions carefully before operating the winch; Using the snatch block to help your work more easily; Another safety tip: throw a blanket onto the cables to reduce whiplash if something breaks loose.

X-BULL 12V Synthetic Rope Electric Winch. Three-stage Planetary Gear System/Super Big Power, High Tensile Synthetic Cable/Power In & Power Out Motor for Positive Load Control/Braker for Maximum Safely. Free Spooling Clutch for Fast Wire Rope Payout/Heavy Duty Sealed Contactor/Wire/Wireless Remote Control Model for Easy Operation. Outline size :(length X width X height) 20.8"X 6.5" X 8.6.

Mounting bolt type :10.00 ± 0.015" × 4.50 ± 0.010". Synthetic rope :3/8'' x 78 ft. Clutch released: put out the winch rope.

Clutch engaged: ready for pulling. All metal waterproof construction/Corrosion resistant finish.

If Motor stalls, stop winching immediately. Keep duration of winching pulls as short as possible: Do not use for more than 1 minute when at or near rated load.

If Motor becomes hot to touch, stop winching immediately. Allow Motor to cool before resuming. Check tightness of all mounting hardware and electrical connections periodically. Remove all dirt and corrosion as required. Do not disassemble Mechanical Gear System. High temperature lithium grease has been applied at the factory. No user maintenance is required. Motor is powered by a. When the winch is connected to the control box. Make sure that the protective sleeves on the wires are in place. The wire must not touch any conductors to avoid short circuit. Three-stage Planetary Gear System Power In & Power Out Motor for Positive Load Control Automatic Load-Holding Braker for Maximum Safely High Tensile Synthetic Cable Free Spooling Clutch for Fast Wire Rope Payout Heavy Duty Sealed Contactor Wire/Wireless Remote Control Model for Easy Operation Alloy Hawse Fairlead.

The weight of the Dyneema rope is 1/10 of the weight of the steel rope, which reduces the weight of the winch by about 20 pounds. Dyneema rope has good resistance to bending fatigue, abrasion resistance, weather resistance, UV protection and chemical resistance. Dyneema rope is safer than steel, when the rope breaks. We guarantee against any defective or misrepresented products.